Guidewire Components and Medical Fine Wire
MOOSEN reviews drawings for platinum-iridium fine wire, coated wire, coaxial composite wire and radiopaque marker bands. Send the part revision, target dimensions and delivery format to request a component quote. Include the mating dimensions if the wire or marker must pass through a lumen, seat on a shaft or fit beneath a jacket.
Start with the item that will appear on the purchase order. A fine wire, a wound coil and an assembled guidewire require different drawing details and acceptance records. For finished-device programs and application comparisons, see medical guidewire types and OEM sourcing.

Which Guidewire Component Are You Buying?
Use the bill of materials and a cross-section to identify the quoted item. Published guidewire filings show designs with a tapered core, an outer coil, a separate marker band, a radiopaque polymer jacket or combinations of these features. The individual design determines which parts and interfaces need their own specifications. See a guidewire assembly with a coil and marker band and an assembly with a radiopaque jacket.
| Component | Design feature and information to share |
|---|---|
| Core wire | For the underlying shaft, identify alloy and condition, diameters, taper profile, lengths from a defined datum and surface criteria. |
| Distal coil | For a helix fitted over part of a shaft, give filament material and diameter, coil diameter, free length, pitch, end geometry and fit at the joint. |
| Radiopaque marker | For an imaging reference at a defined position, provide alloy, inside and outside diameters, axial length, edge condition and assembled position. |
| Insulated wire | For an electrical barrier around a conductor, specify conductor diameter, polymer, overall diameter, coverage, exposed ends and electrical inspection. |
| Composite or stranded wire | Define the metal geometry or filament arrangement with a cross-section, individual materials, core area fraction or filament count, and overall diameter. |
Core Wire and Distal Coil Sourcing Requirements
A core-wire drawing should show whether the purchase covers uniform feedstock or a part that already has a taper or other machined features. When qualifying a supplier for a ground core, dimension the profile from a common datum. Identify where the supplier must measure the shaft, transitions and distal section. Define surface acceptance at the transitions and ends so a sample can be evaluated before assembly. A published vascular design uses a progressively reduced core section and a spring coil over the distal portion. See the FDA 510(k) summary for a ground-core guidewire.
If the coil is a purchased part, provide its free-state geometry and indicate which dimensions are assessed after assembly. The coil’s free inside diameter governs fit over the intended section, while its outside diameter contributes to the assembled profile. Where pitch changes along its length, dimension the zones. Define the end geometry at each attachment point and ask the proposed coil supplier to confirm how it measures the part without stretching or compressing it.
Qualification for guidewire core grinding and distal coil supply should use samples made to the intended profile, alloy condition and end geometry. MOOSEN publishes examples of single- and multiple-filament wound signal leads for brain electrodes. Assess an RFQ for a guidewire distal coil against its own drawing and process requirements. See the MOOSEN wound signal lead examples.
Platinum-Iridium Fine Wire and Marker Bands
For solid platinum-iridium fine wire, specify the alloy composition and material condition on the drawing. The same nominal diameter can be used for parts with different forming, joining or electrical requirements. If the wire will be wound or terminated downstream, identify the features that affect your process, such as straightness, surface condition or a specified tensile property. For a cut piece, describe the end condition and how length will be measured. See platinum-iridium fine wire specifications.
For a discrete radiopaque band, dimension the bore against the actual surface it will seat on. This may be a bare shaft or an intermediate layer. If the band falls under a jacket or inside a coil, evaluate the full stack of dimensions to see how much clearance remains. Define the axial marking length and where the band sits relative to the tip or another reference point. Specify the edge and surface conditions needed for the next assembly step. See the platinum-iridium marker band product page.
Component inspection can confirm band dimensions and material identity. Imaging verification on the finished device can then assess visibility in the final construction. FDA’s vascular guidewire guidance discusses evaluating radiopaque sections or markers using X-ray and a comparison material or device. If your program uses a marker coil or a radiopaque jacket, identify that form explicitly in the RFQ. See the FDA guidewire radiopacity guidance.
Specify Insulation, Coaxial Composite and Stranded Construction
Electrical insulation on fine wire
State the purpose of the polymer layer. MOOSEN documents ETFE-coated platinum-iridium and composite wires. If the layer provides electrical isolation, specify conductor diameter, coated diameter, required coverage and the location of any exposed ends. When both overall diameter and coating thickness are critical, define where and how to measure each. Tie any electrical test to its own acceptance criterion and sample conditions. A finished guidewire’s lubricious surface has a separate functional requirement and should be specified and verified for that purpose. See ETFE-coated medical wire for conductor insulation requirements.
Coaxial composite wire
A drawn filled tube construction uses an inner material within an outer metal sheath. Write both materials on the drawing and show the desired cross-section. If the core fraction matters, specify its basis, tolerance and measurement method. A core fraction expressed as a percentage of the metal cross-sectional area needs a different reporting basis from a diameter ratio. Indicate any polymer coating as a separate layer, with its own dimensions and acceptance criteria. Ask which construction and inspection records can be quoted for the exact material combination. See a DFT construction reference and MOOSEN coaxial DFT composite medical wire.
Stranded wire and multiple-filament windings
A strand combines individual wire filaments into a bundle. A multiple-filament winding arranges filaments into a specified helix and may require separate conductor paths. Each filament can itself be solid, composite or coated, depending on the design. Call out the filament count, individual wire size, overall diameter and arrangement. Define lay or winding pitch where it affects the device interface. For a signal lead, identify any continuity and isolation criteria across the conductors. See the strand and cable construction reference.
Choose the Delivery Format Before Comparing Prices
MOOSEN lists custom diameters and lengths for coated wire, discrete platinum-iridium bands and formed signal leads in single- or multiple-filament configurations. Confirm the format for the specific part, since packaging and the amount of downstream preparation can change both the quote and the usable yield. State what will be loaded into your assembly process and what must be identified on the label.
- Continuous wire. Ask about reel compatibility, minimum uninterrupted usable length, allowable joints, winding direction and how the wire ends are restrained. If the pay-off system is sensitive to spool geometry or tension, include the reel drawing or equipment interface.
- Cut lengths. Specify nominal length and tolerance, end and straightness criteria, the counting unit and packaging that protects the piece during receipt and handling.
- Discrete markers or formed pieces. Specify quantity per package, orientation if needed for feeding and how to protect small parts from deformation or mixing.
Request a sample in the expected delivery format if the packaging affects handling. This matters when a long wire will be paid off directly into equipment, or when a thin band needs to be picked and placed without distortion. Include a lot identifier on each package and a way to match it to the inspection report.
When a wire will be cut or formed after receipt, identify the critical step for which the supplied material acts as input. A coil former may require an agreed material condition and reliable payout, while an assembly fixture may depend on a cut-length tolerance and end finish. A marker may need a packaging orientation that keeps small rings separated and easy to identify. These details help distinguish the wire or discrete part being purchased from the features the device maker plans to add later. State that handoff explicitly on the drawing or RFQ and keep it consistent in the first-article request.
Send a Drawing for a Component Quote
Include the part number and revision, alloy and material condition, controlled dimensions, quantities and delivery format. Mark the dimensions that control fit and add the relevant section view or mating-part information. Identify material records, dimensional results and required electrical or mechanical test data. For composite wire, include the complete layer or filament construction. If the assembly uses a marker, specify the surface it mates with and any critical edge requirements.
Ask the supplier to confirm the proposed material and format, available inspection evidence, open tolerances and sampling schedule. For the first sample lot, agree which dimensions will be reported as actual values and which will be accepted on a pass/fail basis. Carry the accepted drawing revision and report requirements into the production order so the lot can be verified at receipt.
If the program includes several component versions, describe their different functions alongside the requested quantities. For example, a marker variant may have the same bore as another part but a different axial length. A drawing revision and separate item number let the supplier prepare samples for both versions and let the buyer keep the delivery records aligned during assembly. Share your target dimensions and part quantities for a review of fine wire, coated or coaxial composite wire, or marker bands.
