PRECISION PRECIOUS-METAL COMPONENTS
Platinum Iridium Marker Discs
Drawing-defined platinum-iridium marker discs for medical device assemblies where a compact radiopaque reference is required. Share the disc drawing, location and joining method for a component review.
A compact marker form, specified for your assembly
MOOSEN makes drawing-defined platinum-iridium marker discs for device designs that require a compact flat marker. Diameter, thickness, central features and edge condition are specified for the customer’s placement process; final dimensions and material condition are agreed for each project.

Specify the marker disc
Use these fields to start a technical quotation. Values are set by the released drawing and the downstream assembly, not by a universal catalog size.
| Material | Platinum-iridium alloy; confirm grade and material documentation in the RFQ |
| Outside geometry | Disc diameter, profile and any locating feature |
| Thickness | Nominal thickness and tolerance |
| Opening or feature | Through-hole, slot, recess or perforation if required |
| Edges and surface | Edge condition, burr limit, finish and handling requirements |
| Assembly interface | Placement, joining method and adjacent materials |
| Verification | Drawing-based dimensional and visual checks; records by agreement |
Where marker discs fit
Radiopaque reference
Define the disc location around the device feature that must be identified under imaging. Confirm the required visibility with the device maker.
Compact assembly
A disc form can suit a constrained layout where a tube-shaped band is not the right geometry. The surrounding shaft or housing controls the design.
Custom feature
Openings or shaped edges may support positioning or joining. Their manufacturability and inspection method should be reviewed from the drawing.
MOOSEN’s drawing-led approach
- Review material grade and disc geometry together
- Discuss forming, cutting and edge finish before prototype release
- Check how the disc will be placed and joined in the device
- Agree inspection points and documentation for the component order
Select the right component for your assembly
Compare adjacent MOOSEN component forms by function and interface. These are design routes, not interchangeable stock sizes. Final feasibility, dimensions and acceptance are reviewed against your drawing.
| Component route | Choose it when | What to confirm |
|---|---|---|
| Platinum–iridium marker discs | a compact flat marker with drawing-defined placement | Use the approved drawing and assembly method as the decision basis. |
| Platinum–iridium marker bands | a tubular marker around a shaft | Review this component |
| Platinum–iridium perforated rings | a ring requires drawing-defined openings | Review this component |
Prepare a useful RFQ
Please include the current drawing revision and the fields below where available. The contact form accepts a drawing or specification file; prototype quantity, annual volume and required records can be added there.
- disc diameter
- thickness
- edge
- retention feature
- joining method
- visibility target
- inspection
Evidence to agree: material documentation, critical dimensions, visual or electrical checks, sampling and release records as applicable to this component. No universal size, tolerance or performance claim is implied.
Frequently asked questions
Can MOOSEN make a marker disc to my drawing?
Send the drawing and application context. MOOSEN will assess the specified platinum-iridium geometry and tolerances, then define a production route for quotation.
Is a marker disc the same as a marker band?
No. A disc is primarily a flat or shaped part, while a marker band is a short tubular component. Choose the form around the device geometry and placement method.
What details are needed for a quotation?
Provide alloy grade, diameter, thickness, openings or features, tolerances, edge and surface requirements, quantities and the planned assembly method.
Can you confirm radiopacity or device performance?
Component material and geometry can be reviewed, but imaging and finished-device performance must be validated by the device manufacturer for its intended use.
Can we choose the disc thickness and edge condition?
MOOSEN makes platinum-iridium marker discs to the approved drawing, including specified thickness, diameter and edge finish after manufacturability confirmation.
Can you supply samples with inspection records?
MOOSEN can quote sample discs and the agreed dimensional or visual records for the customer’s assembly and imaging evaluation.
Send your marker disc specification
Upload a drawing or describe the target geometry, material, quantity and verification requirements. We will review the component scope and next steps.
