FINISHED ELECTRODE LEADS / COMPONENT PATHWAYS

Paddle, Cylindrical and Directional Electrode Leads

MOOSEN manufactures customer-designed finished paddle, cylindrical and directional electrode leads, alongside Pt–Ir contacts and fine-wire conductors for these lead designs. Contact geometry, orientation and connection features follow the customer’s assembly drawing.

Choose the geometry before the part

The device architecture determines what each metal component must do. Use the configuration that matches your drawing, then define the details with MOOSEN.

Paddle format

Plan contact pattern, exposed area, backing interface and conductor exit.

Cylindrical format

Set ring/contact length, shaft fit, spacing and end transitions.

Directional format

Define angular orientation, segmented contacts and location datums.

Components at the interfaces

A lead assembly combines conductive contacts, fine-wire paths, insulation transitions and connector features. MOOSEN’s review begins with the supplied drawing, identifies the component scope and flags missing interface data before quotation.

  • Contact material and exposed geometry
  • Conductor route and connection method
  • Assembly datums, edge condition and records
Representative paddle, cylindrical and directional electrode lead components product-system image
Representative MOOSEN product-system image; final construction is drawing-defined.

Specification and RFQ checklist

Lead formatPaddle, cylindrical or directional design supplied by customer
Electrode contactMaterial, number, geometry, spacing and exposed area
ConductorPlatinum-iridium where specified; routing and termination
Insulation interfaceMaterial stack, openings and lead-body transition
ConnectionDistal and proximal interfaces, joining and strain relief
VerificationContact geometry, visual condition and agreed electrical checks

MOOSEN advantages for a lead program

MOOSEN combines platinum-iridium material expertise with precision component engineering and production. Our team coordinates contact geometry, conductor interfaces, assembly fit and inspection requirements against the customer’s drawing.

Select the right component for your assembly

Compare adjacent MOOSEN component forms by function and interface. These are design routes, not interchangeable stock sizes. Final feasibility, dimensions and acceptance are reviewed against your drawing.

Component routeChoose it whenWhat to confirm
Paddle, cylindrical and directional lead componentsan electrode geometry chosen for the device interfaceUse the approved drawing and assembly method as the decision basis.
Flexible cuff and membrane electrode componentsa conformable cuff or membrane carrier is requiredReview this component
Sensing and diagnostic lead componentsthe primary use is sensing or diagnostic captureReview this component

Prepare a useful RFQ

Please include the current drawing revision and the fields below where available. The contact form accepts a drawing or specification file; prototype quantity, annual volume and required records can be added there.

  • lead format
  • exposed contact arrangement
  • conductor path
  • insulation boundary and verification

Evidence to agree: material documentation, critical dimensions, visual or electrical checks, sampling and release records as applicable to this component. No universal size, tolerance or performance claim is implied.

Frequently asked questions

Can MOOSEN supply a finished stimulation lead?

Yes. MOOSEN offers customer-designed finished electrode leads as well as individual contacts and conductors. The buyer approves the design and completes final medical-device qualification.

What changes between paddle and cylindrical contacts?

Their geometry, placement and insulation interface differ. Send the intended lead architecture and contact drawing for review.

Can directional contact features be made to a drawing?

MOOSEN’s engineering team evaluates segmented contact geometry, orientation features and inspection feasibility against the supplied drawing before confirming the component production scope.

Can directional contacts be made with our exposed-area pattern?

MOOSEN manufactures platinum-iridium contact features to the approved directional pattern, including the specified orientation, spacing and edge condition.

Can one supplier support different contact geometries in a lead family?

MOOSEN can quote drawing-defined ring, paddle-related and directional contact components as separate part numbers, with each geometry controlled to its own revision.

What should we provide for a pilot build?

Send contact drawings, lead assembly context, material grade, prototype quantity and inspection criteria. MOOSEN will define the component supply and sample plan in the quotation.

Send a lead or component drawing

Share the device architecture, interface drawings, target materials, prototype quantity and acceptance criteria. We will identify the component route to review.

WhatsApp