NEUROVASCULAR DELIVERY / APPLICATIONS
Neurovascular Delivery-System Marker Components
MOOSEN makes platinum-iridium marker bands for neurovascular catheter and delivery-system designs. Band dimensions and edge condition follow the device maker’s drawing, assembly method and imaging requirements.
Where development gets difficult
The right component starts with the device maker’s design constraints. These questions shape the drawing, quotation and inspection plan.
Very small marker envelope
Band OD, ID, wall thickness and length must fit the shaft while leaving room for the planned attachment method.
Edge and assembly interaction
Band edges, surface condition and joining method need to be evaluated with the catheter or guidewire construction.
Design-dependent visibility
Imaging needs must be defined by the device maker; material choice alone does not establish finished-device visibility.
MOOSEN component pathways
We supply components to an agreed drawing and confirm the scope for each program. The following product routes are starting points for engineering review.
Platinum-iridium marker bands
Review drawing-defined band dimensions, edge finish and surface requirements.
Custom band geometry
Discuss nonstandard lengths, profiles and assembly features against the customer drawing.
Component inspection plan
Agree on measurable dimensions and surface criteria before production and lot release.

Why work with MOOSEN
Marker-focused review
Keep marker geometry tied to shaft fit, placement and the specified assembly route.
Pt-Ir material focus
Discuss the requested platinum-iridium alloy and geometry for this component category.
Drawing and inspection alignment
Confirm which dimensions and edge features must be measured and documented.
What to send for engineering review
- Catheter or guidewire assembly drawing
- Band OD, ID, wall, length and tolerances
- Marker placement and attachment method
- Imaging target, quantity and inspection records
Frequently asked questions
Can MOOSEN make markers for our neurovascular catheter or guide-wire design?
MOOSEN manufactures platinum-iridium marker bands and rings to the buyer’s shaft fit, placement and attachment drawing.
Can thin-wall or short bands be quoted?
MOOSEN evaluates the submitted wall thickness, length and edge condition for the requested geometry and quotes the feasible configuration.
Can samples be supplied for placement and imaging tests?
MOOSEN can supply quoted sample bands for the customer’s assembly and visibility evaluation before production release.
What dimensions should we send?
Provide OD, ID, wall, length, tolerances, marker position and joining method together with forecast quantity.
Can inspection records be supplied?
MOOSEN agrees dimensional, edge and material checks with the buyer and supplies the records specified for the order.
Send Your Device Specifications
Send your drawing or preliminary specification. MOOSEN will define the relevant component scope and the information needed for quotation or sampling.
