FINISHED ELECTRODE LEADS / COMPONENT PATHWAYS
Electrode Extension Leads
Electrode extension leads connect a distal electrode pathway to a remote device interface. MOOSEN supplies customer-designed finished electrode extension leads as well as drawing-defined Pt–Ir contacts and fine-wire conductors. Our engineering team aligns component geometry, routing space, termination interfaces and inspection requirements with the customer’s design.
Choose the geometry before the part
The device architecture determines what each metal component must do. Use the configuration that matches your drawing, then define the details with MOOSEN.
End-to-end interface
Define both mating ends, pin or ring orientation and connection sequence.
Conductor route
Review length, insulation, bend path and strain-relief transitions.
Assembly checks
Agree continuity, isolation and dimensional checks for the supplied component scope.
Components at the interfaces
A lead assembly combines conductive contacts, fine-wire paths, insulation transitions and connector features. MOOSEN’s review begins with the supplied drawing, identifies the component scope and flags missing interface data before quotation.
- Contact material and exposed geometry
- Conductor route and connection method
- Assembly datums, edge condition and records

Specification and RFQ checklist
| Extension layout | Length, route and proximal/distal interfaces |
| Conductors | Count, material, form and insulation |
| Contacts | Platinum-iridium where specified; mating geometry and finish |
| Joint | Joining method and transition or strain relief |
| Environmental requirements | Customer-defined processing and service conditions |
| Verification | Continuity, isolation, dimensions and records by agreement |
MOOSEN advantages for a lead program
MOOSEN combines platinum-iridium material expertise with the engineering and production of small contacts and fine-wire conductor components. Geometry, material, assembly interfaces and inspection requirements are coordinated against the customer’s drawing to define a controlled component scope.
Select the right component for your assembly
Compare adjacent MOOSEN component forms by function and interface. These are design routes, not interchangeable stock sizes. Final feasibility, dimensions and acceptance are reviewed against your drawing.
| Component route | Choose it when | What to confirm |
|---|---|---|
| Electrode extension lead components | a connection path between specified device interfaces | Use the approved drawing and assembly method as the decision basis. |
| Sensing and diagnostic lead components | the lead itself captures a sensing signal | Review this component |
| Flexible cuff and membrane electrode components | the electrode uses a flexible cuff or membrane carrier | Review this component |
Prepare a useful RFQ
Please include the current drawing revision and the fields below where available. The contact form accepts a drawing or specification file; prototype quantity, annual volume and required records can be added there.
- proximal and distal interface
- conductor route
- length
- insulation
- strain relief and continuity test
Evidence to agree: material documentation, critical dimensions, visual or electrical checks, sampling and release records as applicable to this component. No universal size, tolerance or performance claim is implied.
Frequently asked questions
Can MOOSEN provide a complete extension lead?
Yes. MOOSEN can quote customer-designed finished electrode extension leads or the specified component scope. The buyer provides interface drawings and completes final device qualification.
What are the key RFQ details?
Include both connector interfaces, conductor count and length, insulation, joining method, quantities and test criteria.
Are connector standards assumed?
No. The mating standard or proprietary interface must be supplied by the customer.
Can you make the contacts and conductors to our connector pinout?
MOOSEN produces drawing-defined platinum-iridium contacts and fine-wire conductors for the specified pinout and termination scheme. Send the mating-interface drawing so the quoted component scope matches your assembly.
Can we order prototypes before setting an annual volume?
MOOSEN supports sample orders for fit and assembly evaluation, then quotes repeat production against the approved drawing revision and forecast quantity.
What inspection evidence can accompany the order?
MOOSEN aligns dimensional, visual and continuity checks with the agreed component specification and provides the release records defined in the purchase order.
Send a lead or component drawing
Share the device architecture, interface drawings, target materials, prototype quantity and acceptance criteria. We will identify the component route to review.
