PRECISION PRECIOUS-METAL COMPONENTS

Platinum Iridium Marker Discs

Drawing-defined platinum-iridium marker discs for medical device assemblies where a compact radiopaque reference is required. Share the disc drawing, location and joining method for a component review.

A compact marker form, specified for your assembly

MOOSEN makes drawing-defined platinum-iridium marker discs for device designs that require a compact flat marker. Diameter, thickness, central features and edge condition are specified for the customer’s placement process; final dimensions and material condition are agreed for each project.

Representative platinum-iridium marker discs for medical device assemblies
Representative product forms; final geometry follows the agreed drawing.

Specify the marker disc

Use these fields to start a technical quotation. Values are set by the released drawing and the downstream assembly, not by a universal catalog size.

MaterialPlatinum-iridium alloy; confirm grade and material documentation in the RFQ
Outside geometryDisc diameter, profile and any locating feature
ThicknessNominal thickness and tolerance
Opening or featureThrough-hole, slot, recess or perforation if required
Edges and surfaceEdge condition, burr limit, finish and handling requirements
Assembly interfacePlacement, joining method and adjacent materials
VerificationDrawing-based dimensional and visual checks; records by agreement

Where marker discs fit

Radiopaque reference

Define the disc location around the device feature that must be identified under imaging. Confirm the required visibility with the device maker.

Compact assembly

A disc form can suit a constrained layout where a tube-shaped band is not the right geometry. The surrounding shaft or housing controls the design.

Custom feature

Openings or shaped edges may support positioning or joining. Their manufacturability and inspection method should be reviewed from the drawing.

MOOSEN’s drawing-led approach

  • Review material grade and disc geometry together
  • Discuss forming, cutting and edge finish before prototype release
  • Check how the disc will be placed and joined in the device
  • Agree inspection points and documentation for the component order

Select the right component for your assembly

Compare adjacent MOOSEN component forms by function and interface. These are design routes, not interchangeable stock sizes. Final feasibility, dimensions and acceptance are reviewed against your drawing.

Component routeChoose it whenWhat to confirm
Platinum–iridium marker discsa compact flat marker with drawing-defined placementUse the approved drawing and assembly method as the decision basis.
Platinum–iridium marker bandsa tubular marker around a shaftReview this component
Platinum–iridium perforated ringsa ring requires drawing-defined openingsReview this component

Prepare a useful RFQ

Please include the current drawing revision and the fields below where available. The contact form accepts a drawing or specification file; prototype quantity, annual volume and required records can be added there.

  • disc diameter
  • thickness
  • edge
  • retention feature
  • joining method
  • visibility target
  • inspection

Evidence to agree: material documentation, critical dimensions, visual or electrical checks, sampling and release records as applicable to this component. No universal size, tolerance or performance claim is implied.

Frequently asked questions

Can MOOSEN make a marker disc to my drawing?

Send the drawing and application context. MOOSEN will assess the specified platinum-iridium geometry and tolerances, then define a production route for quotation.

Is a marker disc the same as a marker band?

No. A disc is primarily a flat or shaped part, while a marker band is a short tubular component. Choose the form around the device geometry and placement method.

What details are needed for a quotation?

Provide alloy grade, diameter, thickness, openings or features, tolerances, edge and surface requirements, quantities and the planned assembly method.

Can you confirm radiopacity or device performance?

Component material and geometry can be reviewed, but imaging and finished-device performance must be validated by the device manufacturer for its intended use.

Can we choose the disc thickness and edge condition?

MOOSEN makes platinum-iridium marker discs to the approved drawing, including specified thickness, diameter and edge finish after manufacturability confirmation.

Can you supply samples with inspection records?

MOOSEN can quote sample discs and the agreed dimensional or visual records for the customer’s assembly and imaging evaluation.

Send your marker disc specification

Upload a drawing or describe the target geometry, material, quantity and verification requirements. We will review the component scope and next steps.

WhatsApp